Ortofon SPU Classic G MKII Cartridge

HKD 11,500.00

數量

簡介

+
全鑽石針頭, 球形, 鑽石針 唱頭 The SPU Classic G MkII is known for its dynamic and powerful sound reproduction The SPU Classic GM MkII is a Moving Coil cartridge with an 18 µm spherical stylus profile. The SPU Classic series embodies the essence of the original Moving Coils and are a perfect solution for the playback of both early and modern and contemporary stereo recordings. The ST-7 transformer is a perfect match for the SPU Classic G MkII cartridge. 丹麥 ortofon SPU Classic Gm MKII 唱頭

付款、送貨及退貨

+

送貨方式

  • 香港 本地送貨
  • 國際送貨

付款方式

  • PayMe
  • 信用卡 / PayPal Wallet
  • 銀行轉帳

退貨及退款政策

聯興電業(香港)有限公司(以下簡稱本公司),為了讓您能夠安心的在本公司網站的購物,特此向您說明本網站的退換貨政策、手續及須知,以保障買賣雙方的權益,請您詳閱下列內容: 退換貨品須知 : - 如閣下於本公司網站所購買的任何商品,於收貨日/取貨日起計7天內發現貨品有非人為之明顯損毁或款式錯誤,請於7天內聯絡客戶服務主任,並提供相關的單據及產品編號以便辦理換貨。請確保商品及其包裝完整 。 - 請注意:如客戶經由 Whatsapp/Facebook 客戶服務主任協助您申請退換貨時,即表示客戶已同意本公司在網站上之完整退換貨政策、手續及須知,客戶服務主任方可為客戶代為申請退貨程序。 - 一經查核所購買的貨品符合退換條件,將有專人聯絡閣下安排相關退換程序。 - 所有於本公司購買的電子產品/電器貨品,7天內因非人為損壞或質量問題均可換貨,7天後貨品的保養與損壞,需保養或維修則須直接向代理商查詢。 - 任何電器產品,電子產品,預購產品,折扣商品,如已經開封和使用的,恕無法退回及退款,敬請見諒。 - 客戶使用後未能符合個人喜好或質素未如理想,恕不接受退貨及退款安排。 - 一般布料編織品,由於布料彈性不同,可能存在輕微尺寸誤差(請參照個別產品的資料),此屬正常情況,不能因為貨品存在輕微尺碼誤差而要求退換。 - 由於電腦螢幕的設定與解析度不同,可能會有輕微色差現象,此屬正常情況,不能因為貨品存在輕微色差而要求退換(實際顏色需以官網的實物圖為準,本公司對貨品是否存在明顯的色差問題會保留最終決定權)。 - 如發現退換貨商品並不符合完整退換貨條件,本公司會把退貨寄回至客戶之前所提供的送貨地址,而客戶需自行承擔運費。 - 如貨品已下架、出現缺貨或其它原因沒法進行更換,本公司將改以客戶付款的同樣形式全數(貨品及運費)退回給客戶。 - 客戶網上下單前請確保收件人名稱、收件人電話號碼及收件地址正確,提供錯誤的資料導致貨品延遲取貨及第三方盜竊的費用,要由客戶自行負責。 退貨及換貨程序 : 如貨物未有按照在線客服提供的指示及方法辦理退換手續,本公司保留拒絕退換之權利。 完整退貨內容必須包括以下 (缺一不可): A. 全新未拆吊牌之完整包裝貨品 (請必須摺好入回包裝袋內) B. 原裝包裝袋 C. 附屬配件 (如有) D. 收據 退換貨程序: 所有退換貨及退換尺碼,需於貨品簽收日期起的7天內進行退換申請,並且需要先拍照通知客戶服務主任相關退貨項目,並且要把貨品在7天內送到本公司。如產品之明顯損毁是非人為而是運送導致,本公司會支付退貨運費。 退換貨服務:每張訂單僅提供一次。發貨前本公司會經過仔細的質量檢查;如客人收貨後,發現有質量問題或有瑕疵的貨品,請先拍照通知客戶服務主任進行相關退貨項目。為免再爭議,客人請自行於辦理退換貨前確實驗收退貨品與您申請的退換貨品無誤,並且退換時需連退換貨單一拼寄出,需要寫明正確退換貨品編號/尺碼(如適用)及理由,再包裝好退換貨品,然後經運輸送至本店鴨寮街152號舖。 本公司(聯興電業(香港)有限公司)有權於毋須在另行通知情況下更改條款及細則,及拒絕更換產品的權利;如有任何爭議,本公司將擁有最終的決定權。 最近更新日期:2021年3月27日

商品詳情

Product Features:

Choosing an Ortofon SPU cartridge for your turntable. All Ortofon SPU-cartridge models are highly indebted to their SPU-ancestor launched in 1958, when the original Ortofon stereocartridge was born. So, ever since the various Ortofon SPU - models announced in this manual, have never compromised with the basic design - responsible for the so-called “Ortofon Sound”, world wide related to these cartridges. Refinements on the models have taken benefit from the use of new materials and improved stylus types, to gain the outstanding reproduction qualities. Mounting All SPU-cartridges are designed to bring optimum performance, when the tonearm mounted with the cartridge is adjusted parallel to the record surface, at recommended tracking force.

When antiskating adjustment is possible, we recommend a 50% higher value, when using SPU-cartridges with the Ortofon Replicant stylus, compared to normal setting at recommended tracking force.

The SPU Mono models provide an authentic method of playing back early Mono recordings with a remarkable level of sonic accuracy. The SPU Mono GM MkII is a high output cartridge a with a spherical stylus profile, for the playback of early 25 µm mono recordings with 33 and 45 r.p.m.. Its 3 mV high output eliminates the need for a moving coil transformer.

 

Output voltage at 1000 Hz, 5cm/sec. – 0.2 mV
Channel balance at 1 kHz < 1 dB
Channel separation at 1 kHz  > 20 dB
Channel separation at 15 kHz  > 10 dB
Frequency range at – 3dB – 20-25.000 Hz
Frequency response – 20-20.000 Hz + 3 / – 3 dB
Tracking ability at 315Hz at recommended tracking force *) > 65 µm
Compliance, dynamic, lateral – 8 µm/mN
Stylus type – Nude Spherical
*) Typical value

Stylus tip radius – R 18 µm
Tracking force range – 3.0-5.0 g (30-50 mN)
Tracking force, recommended – 4.0 g (40 mN)
Tracking angle – 20°
Internal impedance, DC resistance – 6 Ohm
Recommended load impedance > 10 Ohm
Cartridge body material – Wooden Powder
Coilwire material – High Purity Copper (OFC)
Cartridge colour – Black
Cartridge weight – 31.5 g

你可能感興趣的商品